Pride Go Chair
The all-new Go-Chair is re-engineered from the ground up, offering a sleek, bold new style available in an array of contemporary colors. Enhanced performance and comfort, along with feather-touch disassembly, allows you to enjoy light-weight travel and independence on the go. With an increased weight capacity of 300 lbs. and a sleek, bold look, the new Go-Chair makes travel easy.
- Choice of 6 colors
- 18" x 17", 5-point swivel seat with latch release
- Increased 300 lb. weight capacity
- Faster speed - up to 3.7 mph
- Larger, 18 amp batteries
- Improved agility - longer wheel base; wider stance; compact turning radius 25.4"
- Dual swing-away, under seat storage bins
- Larger, height & width adjustable armrests
- Larger footplate
- One hand feather-touch disassembly
- 60" lap belt
Weight Capacity300 lbs.
Turning Radius125.4" with foot platform
Length1,228.5" without front rigging
33" with front rigging
Maximum Speed3up to 3.7 mph
Ground Clearance11.6" at anti-tip
Front Wheels6" solid casters
Drive Wheels9" solid
Rear Wheels3" solid anti-tips
Standard Electronics40 amp, PG GC3 (non-programmable)
Battery Size (2 required)18 Ah, 12 V, deep-cycle
Standard Battery ChargerOff-board, 2 amp
Per-Charge Range3,11Up to 8.74 miles
Battery Weight931 lbs. (Battery Pack)
Weight of Heaviest Piece536 lbs. (rear)
Standard Seat Weight30 lbs.
Standard Seat SizeCompact, Foldable (18"x17")
Medicare Code CoverageK0899 Power Mobility Device, not coded by DME PDAC or does not meet criteria
Warranty5-Lifetime limited on frame;
13- month limited on electronics;
13- month limited on drive motors
Notes1Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2Without front riggings.
3Varies with user weight, terrain, battery type, battery condition and tire pressure.
5Does not include seat or battery weights.
9Battery weight may vary based on manufacturer.
11Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.
The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice.